CESVA SC-310 Sound Level Meter and Real Time Analyser

The SC310 is a user-friendly, type 1 integrating sound level meter. It can be used as either a sound level meter or as a real time spectrum analyser in one third octave band and octave band, with type 1 filters.

If you'd like any further information then don't hesitate in giving us a call or dropping an e-mail.

 

         

The SC310 measures all functions simultaneously, with all frequency weightings. Some of them are necessary to calculate the basic index for the acoustic evaluation of most countries in the world: S, F and I functions, equivalent continuous levels, percentiles, impulsiveness indices, peak levels, sound exposure levels, short functions, etc.

The free memory space can be also configured as a circular memory. This feature along with the possibility of downloading data simultaneously to its storage, converts the SC310 into a perfect platform for permanent acoustic monitoring.

The SC310 preamplifier and microphone is detachable. You can uncouple it and move it away from the SC310 by using the extension cable (CNR-010). The instrument can be complemented with an outdoor kit (TK-1000) for taking measurements in the open air.
 

             
       

Accessories

Supplied accessories

FNS-030 Case

PVM-05 Wind screen

SFT030 Cesva Capture Studio software

CN1US Cable USB with connector mini-USB

 

Support

SC-310 SLM Spec Sheet (.pdf 2,905kB)

Cesva Capture Studio (.pdf 131kB)

         
         

 

 

 

 

 

 

 

 

       

Sets

EM531 Set consisting of SC310 Integrating-averaging sound level meter and real time spectrum analyser, CB-5 Sound level calibrator, TR-40 tripod, ML-50 transporting briefcase.

EM231 Set consisting of: SC310 Integrating-averaging sound level meter and real time spectrum analyser, CB-5 Sound level calibrator, ML-10 transporting briefcase.


Optional modules

VM310 Module for the measurement of vibrations

RT310 Module for the measurement of reverberation time

EF310 Module for extended frequency analysis

DS310 Dosimeter module for the assessment of noise at workplace


Optional accessories

AC001 ICP® accelerometer sensitivity 100 mV/g, frequency range (± 10%) 0,7 Hz to 10 kHz

AC006 ICP® accelerometer sensitivity 1000 mV/g, frequency range (± 10%) 0,35 Hz to 2600 Hz

DA050 Bag with 40 adhesives for AC006 and AC001

PR003 3 m extension pole for microphones. Adaptor for microphone supplied.

TR-001 Tripod support for the preamplifier and microphone

TR-40 Tripod for sound level meter, dosimeter and microphone. Maximum height 1.1 meters.

TR050 Tripod for sound level meter, dosimeter and microphone. Maximum height 1.55 meters.

TK-1000 Outdoor kit

CN-003 Extension cable 3 m

CN-010 Extension cable 10 m

CN-030 Extension cable 30 m

CN1DA AC output audio cable

AM240 Mains feeder 230 V 50 Hz to 5 V

AM241 Mains feeder 110 V 60 Hz to 5 V

AM140 Converter for battery 12 V to 5 V

MG100 GSM modem

MA101 Adapter RS to modem

BT001 Bluetooth device (instrument) for Wireless communications with the PC

BT002 Bluetooth device (PC) for Wireless communications with the PC

ML-50 Briefcase (49 x 36 x 14 cm)

ML-10 Briefcase (30 x 38 x 8 cm)

IM003 Printer 40 columns RS-serial input on battery and transformer
 

             

Head Office: PC Environmental Ltd, Units 1&2 Claylands Road. Ind.Est., Claylands Road, Bishops Waltham, Southampton SO32 1BH UK

Tel: +44 (0)1489 891853                                                  Fax: +44 (0)1489 895488                                          E-mail: info@pcenvironmental.co.uk